Concrete Pricing in Los Angeles, CA (2026)
Planning a driveway, patio, or foundation in Los Angeles? Here is exactly what you need to know about local ready-mix costs, delivery logistics, and weather considerations.
Average Cost Per Yard
$175
Standard 3000 PSI mix
Average Delivery Fee
$75
May waive for full truckloads
Local Popular Bag
Sakrete 60lb High Strength
Best for small DIY jobs
What Drives Concrete Prices in Los Angeles?
If you are pouring concrete in Los Angeles, you already know that local conditions dictate everything from your mix design to your final bill. The base price of $175 per cubic yard is just the starting point.
In Southern California, seismic requirements often necessitate higher strength mixes and extensive rebar reinforcement. Traffic congestion can also impact the allowable window for ready-mix delivery.
When calling local batch plants, always ask about "short load fees." Most suppliers charge the standard $75 delivery fee, but if you order less than a full truckload (usually under 5-7 yards depending on the truck size), you might be hit with an additional short-load penalty.
Weather Warning for Los Angeles
Mild, dry climate allows for year-round pouring. However, rapid evaporation in dry heat may require the use of evaporation retarders or consistent wet curing. Always coordinate with your contractor and ready-mix supplier about adding retarders or accelerators to your mix depending on the season.
Small Jobs vs. Large Pours
For massive projects like a new driveway or foundation, ready-mix trucks are the only way to go. But what if you are just setting a few fence posts or pouring a small AC pad?
For projects under 1 cubic yard, buying bagged concrete is usually more economical. In the Los Angeles area, the Sakrete 60lb High Strength is highly recommended and readily available at local big-box hardware stores. You'll need about 45 of the 80lb bags to equal one cubic yard.
Calculate Your Exact Cost
Don't guess how much you need. Use our calculator below to figure out the exact volume and estimated cost for your specific project dimensions in Los Angeles.
Los Angeles Concrete Project Estimator
This calculator is pre-loaded with the average $175/yard cost for Los Angeles. Adjust the inputs to match your project size.
Project Dimensions
Pricing & Labor
Cost Breakdown
Advertisement
(Placeholder for AdSense / Mediavine. Add script and ins tag here when approved.)
For estimation purposes only. Verify structural calculations with a licensed engineer.
Frequently Asked Questions
How do I avoid short-load fees?
Try to group your concrete projects together. If you are pouring a patio, see if you can pour that walkway you've been putting off on the same day. Most suppliers waive short-load fees if you order over 5 cubic yards.
Should I tip the concrete delivery driver?
While not strictly required, tipping the ready-mix driver is common practice in the industry, especially if they are helpful with the chute or have to navigate a tricky driveway in Los Angeles. A $20 tip is standard for good service.
How long do I have to unload the truck?
Standard industry practice gives you about 5 to 7 minutes per cubic yard of free unloading time. After that, you may be charged "demurrage" (waiting time) fees, which can run $1-$2 per minute. Make sure your crew is ready the moment the truck arrives!
Need to calculate something else?
We have specialized calculators for every part of your project, from rebar to block walls.